2016 eXmark LZE732GKC524A2

$8,499.99 - Stock Number:

Chillicothe, OH

For decades, Exmark's Lazer Z® has been the standard of excellence for commercial-grade, zero-turn mowers. Today, it is coveted by landscape pros and homeowners alike for its unmatched cut quality, productivity, durability and performance. And, just when you thought the best couldn’t get any better—our newest Lazer Z’s have 40% fewer parts, making them more productive and easier to maintain, too. That’s a win-win for everyone.

Specifications

Transmission
Drive Hydro-Drive.
Engine
Fuel Capacity 8-gallon (30.3-L) single fuel tank with single fill location.
Speed 3,750 rpm
Type Kohler® CV732 Command™
Chassis
Caster Angle 0.5"-thick caster yoke arms
Drive Tires 24"x12-12", 4 ply Super Turf.
Frame Unibody, welded, heavy duty 1.5"x3" tubular steel.
Front Caster 13"x 6.5-6", smooth-tread, pneumatic.
Steering Hydraulically dampened twin levers, adjustable both fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
Dimensions
Blade 3 Blades at 18.00" [0.20"-thick (5.1 mm) alloy steel
Blade Spindle No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25 mm (0.98") diameter spindle shaft and splined blade driver.
Blade Tip Speed Approximately 18,500 fpm.
Cutting Deck 52" UltraCut™ Series 4 (132.1 cm)
Height 70.0 in. (177.8 cm)
Length 79.2 in. (201.2 cm)
Speed Up to 10.0 mph (16.0 kmph) forward, and up to 6.0 mph (9.7 kmph) reverse.
Weight 1076 lbs.
Width 64.8 in. (164.6 cm)
General Information
Air Filter Heavy duty canister air filtration system.
Cutting Height 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments.
Deck Full-floating, side-discharge standard, with molded discharge chute and option to bag or mulch.
Deck Construction 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight.
Deck Lift Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
Drive System Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, shock valve, 1.7-quart integrated reservoir, spin-on filter and heavy duty components. 12cc pumps and 14.5 cubic inch motors.
Electrical 12-V battery, 15-amp alternator.
Parking Brake Lever-actuated disc brake.
ROPS 2-post foldable ROPS standard with seat belt and latch.
Safety Systems Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
Seat Deluxe, bolstered suspension seat with Elastomeric Vibration Control material.
Standard Engine Hour Meter
Power Take-Off (PTO)
Engagement MagStop electromagnetic 200 ft-lb clutch with spot brake.

Features

All

  • Deck Support System - A cutting deck this good deserves support that’s every bit as good. That’s why we developed a Panhard rod and strut system to eliminate side-to-side deck sway. Yes, it reduces wear. And maintenance costs, too.
  • Hydro Drive, Simplified - Our innovative hydro-drive system needs only simple, annual maintenance, because it has no hoses to leak and just one easy-to-change belt. As an added bonus, it also lowers the center of gravity for improved handling.
  • Unibody Frame - Our one-piece body frame is a great example of “less-is-more” engineering. Fewer parts equal more strength. And, more durability. So, at least in this case, less is way more.

Product Media

2016 eXmark LZE732GKC524A2